Motion sensor icon.PNG
Split aircon.PNG

Heat Pump


 

Fan Coil

Split \ Window

Motion Sensor

Heating

New_Icon.png

 

ECOsense Energy Save Motion Sensor

Save Energy by Automatically and Wirelessly Power off Air-Condition (and TV) when room is left empty

themostat motion sensor

Cut Energy bills by up to 20%

Learning IR Remote Control codes (up to 2 infrared codes)

Automatically Turns Off Air-Condition when room is left empty

Preset delay time (15, 30 or 60 min) before power off

DIY - No need wires or complex installation (works with 2 AAA)

Totally wireless, simply fix on wall or ceiling

Low-Cost device with High-Savings 

 

Spec Motion Sensor (energy saver)

themostat motion sensor

0.59" (1.5cm) deep

themostat motion sensor
  • Voltage: 3VDC (2* AAA batteries)

  • Size: 2.36” * 2.36” * 0.59” (60 * 60 * 15 mm)

  • Motion sensor: High sensuality Dual Element PIR

  • Detecting range: 20ft (6m) max. at 3600

  • IR transmitting range: 20ft (6m) max.

  • IR transmitting direction: one in front and one on side

  • IR learning code: 2 IR commands (i.e. AirCon and TV)

  • Memory: IR codes are stored in Flash memory – also without batteries 

  • Timer select by slide switch: 15, 30 or 60 minutes

  • Onboard Switch can turn off devices manually  

  • Mounting: optional Ceiling or Wall with screws or sticker

  • Works with IR devices that has discrete OFF command (can work only with remote control that has LCD)

  • Not suitable for room with moving objects (pets, curtains in wind, etc.)

  • Include in box: ECOsense device, 2 AAA batteries and Manual

  • No wire or installation required

  • Long lasting battery life (normally over 6 month)

  • Indoor use only

  • Certification: FCC, CE, IC, EMC, LVD

  • Warranty: 1 year limited 

How it works

themostat motion sensor

When room is left empty, the ECOsense start to countdown the preset time (15 or 30 or 60 minutes). Once it reach the delay time, it will automatically send 'OFF' command to power off the air condition 

Easy to Setup   

Add batteries and stick to ceiling or wall and start to save energy!