Digital Lighting Control
EKON system is a Total Smart Solution to control all the electrical devices in Homes, Offices and Buildings. The system is Plug & Play system that works out of the box and it mainly consist of 3 basic elements:

1. Control panels - wireless touch screens and wall mount or table mount touch screens. These include the build-in controller units
2. Switching Modules – Micro Modules or Wall switches to control lights, appliances, motorized curtains / blinds, etc.
3. Security Devices – close circuit cameras, access control and alarm system

The communication between the wall switches and the touch controllers is done on the exciting power line so there is no need to run extra data wires – simply install EKON’s wall switches (or Micro Modules) and the system is ready to operate.
The system is easily setup by the end-user on the touch screen itself so there is no need for complex PC programming.
The system consists of 3 basic elements:
1. Control Panels
These comprise the build-in controller units which can be wired or wireless and include the following products:
Wall Mount Touch Screens
Table Mount Touch Screens
Wireless Touch Screens

Each system has 1 master controller and up to 16 slaves touch screens remotes in any combination. Both master and slave are Plug & Play technology:
Plug & Play:
  • Power 110-230VAC (50 or 60Hz)
  • Ethernet (RJ45) for LAN
  • Optional RS232 to Master
    		•

    The communication between the wall switches and the touch controllers is done on the exciting power line so there is no need to run extra data wires – simply install EKON’s wall switches (or Micro Modules) and the system is ready to operate.
    The system is easily setup by the end-user on the touch screen itself so there is no need for complex PC programming.
    The system consists of 3 basic elements:
    2. Switching Devices

    Switching devices control lights, air conditions, motors, audio and video and others. These include dimmers, relay module, Infrared Transmitters, etc.

    EKON’s controllers communicate with the switching devices in 2 main technologies (PLC and RF) in which both methods does not require adding control wires ensuring wiring and installation is very simple and can be completed in relatively short time.

     

     

    The communication between the wall switches and the touch controllers is done on the exciting power line so there is no need to run extra data wires – simply install EKON’s wall switches (or Micro Modules) and the system is ready to operate.
    The system is easily setup by the end-user on the touch screen itself so there is no need for complex PC programming.
    The system consists of 3 basic elements:
    3. Security Device
    Close Circuit Cameras, Access Control and Alarm System are integrated with EKON’s system via RS232 \ RS485 or TCP-IP.
     
     

    激光管

    上海网站制作

    上海网站制作